Ezi-SERVO II PE-28L-D / NEMA 11 / large / 16,000ppr
Item No. 51204024007
Ezi-Servo II Plus-E an innovative Closed Loop System that utilizes a high-resolution motor mounted encoder constantly to monitor the current position. The encoder feedback allows the Ezi-SERVO II to update the current position every 50 micro seconds. It allows the Ezi-SERVO II drive to compensate fo
Price €499
excl. tax
Please inquire about delivery time
Description
Ezi-Servo II Plus-E an innovative Closed Loop System that utilizes a high-resolution motor mounted encoder constantly to monitor the current position. The encoder feedback allows the Ezi-SERVO II to update the current position every 50 micro seconds. It allows the Ezi-SERVO II drive to compensate for the loss of position, ensuring accurate positioning. For example, due to a sudden load change, a conventional stepper motor and drive could lose a step but Ezi-SERV II automatically correct the position by encoder feedback.A maximum of 254 axes can be operated from a PC through Ethernet communications. And daisy-chain connection is available thru internally equipped Ethernet HUB. All of the Motion conditions are set through the network and saved in Flash ROM as a parameter. Motion Library(DLL) is provided for programming under Windows XP/7/8/10.
The Flange size of Motor is 28mm(NEMA11). The encoder resolution is 16000 ppr.
The Flange size of Motor is 28mm(NEMA11). The encoder resolution is 16000 ppr.
Specifications
- Manufacturer
- Fastech
- Library
- Motion Library (DLL) for Windows XP/7/8/10
- Weight [kg]
- 0.2
- Motor Size [mm]
- 28 mm
- Number of Phases
- 2
- Current per Phase [A]
- 0.95 A
- Resistance per Phase [Ω]
- 3.2 Ohm
- Inductance per Phase [mH]
- 2 mH
- Holding Torque [Nm]
- 0,118 Nm
- Control Method
- Closed loop control with 32bit ARM
- Current Consumption
- Max 500mA (Except motor current)
- LED Display
- Power Status, In-Position status, Servo On status, Alarm status
- GUI
- User Interface Program within Windows
- Multi Axes Drive
- Maximum 254 axis operating (Selectable IP: 1 - 254)
- Position Gain Selection
- 0 - 63
- In-Position Selection
- 0 - 63
- Position Table
- 256 motion command steps (speed, extermal start, jump, loop, wait and PT finish etc.)
- Rotation Speed
- 0 - 3000 [rpm]
- Rotational Direction
- CW/CCW
- Rotor Inertia
- 18 g*cm²
- Vib. Resist
- 0.5g
- voltage [V]
- 24 VDC
- Operating Temperature [°C]
- 0 - 50 °C
- Encoder Resolition
- 16.000 PPR
Ezi-SERVO II PE-28L-D / NEMA 11 / large / 16,000ppr
Item No. 51204024007
Ezi-Servo II Plus-E an innovative Closed Loop System that utilizes a high-resolution motor mounted encoder constantly to monitor the current position. The encoder feedback allows the Ezi-SERVO II to update the current position every 50 micro seconds. It allows the Ezi-SERVO II drive to compensate fo
Price €499
excl. tax
Please inquire about delivery time
Description
Ezi-Servo II Plus-E an innovative Closed Loop System that utilizes a high-resolution motor mounted encoder constantly to monitor the current position. The encoder feedback allows the Ezi-SERVO II to update the current position every 50 micro seconds. It allows the Ezi-SERVO II drive to compensate for the loss of position, ensuring accurate positioning. For example, due to a sudden load change, a conventional stepper motor and drive could lose a step but Ezi-SERV II automatically correct the position by encoder feedback.A maximum of 254 axes can be operated from a PC through Ethernet communications. And daisy-chain connection is available thru internally equipped Ethernet HUB. All of the Motion conditions are set through the network and saved in Flash ROM as a parameter. Motion Library(DLL) is provided for programming under Windows XP/7/8/10.
The Flange size of Motor is 28mm(NEMA11). The encoder resolution is 16000 ppr.
The Flange size of Motor is 28mm(NEMA11). The encoder resolution is 16000 ppr.
Specifications
- Manufacturer
- Fastech
- Library
- Motion Library (DLL) for Windows XP/7/8/10
- Weight [kg]
- 0.2
- Motor Size [mm]
- 28 mm
- Number of Phases
- 2
- Current per Phase [A]
- 0.95 A
- Resistance per Phase [Ω]
- 3.2 Ohm
- Inductance per Phase [mH]
- 2 mH
- Holding Torque [Nm]
- 0,118 Nm
- Control Method
- Closed loop control with 32bit ARM
- Current Consumption
- Max 500mA (Except motor current)
- LED Display
- Power Status, In-Position status, Servo On status, Alarm status
- GUI
- User Interface Program within Windows
- Multi Axes Drive
- Maximum 254 axis operating (Selectable IP: 1 - 254)
- Position Gain Selection
- 0 - 63
- In-Position Selection
- 0 - 63
- Position Table
- 256 motion command steps (speed, extermal start, jump, loop, wait and PT finish etc.)
- Rotation Speed
- 0 - 3000 [rpm]
- Rotational Direction
- CW/CCW
- Rotor Inertia
- 18 g*cm²
- Vib. Resist
- 0.5g
- voltage [V]
- 24 VDC
- Operating Temperature [°C]
- 0 - 50 °C
- Encoder Resolition
- 16.000 PPR